SurgiLock® Positioning Foam is coated with our patented ElasTak® adhesive polymer technology to provide an aggressive tack for securing patients. It is imperative that patients and/or patients’ limbs don’t move during surgical procedures. Unwanted movement can cause injury and other negative outcomes to the patient and undue stress to the patient and staff.
Our patented Elastak® adhesive polymer is soy based, environmentally friendly, and made in the USA.
1. Open the package and allow SurgiLock® positioning foam to expand.
2. Remove and discard the release liner from both sides of the Jelly Wrap™ positioner by pinching the corner of the foam, grasping the release liner, and pulling it off.
3. Place the Jelly Wrap™ positioner.
A. Align the edge of the Jelly Wrap™ positioner with the center of the inner elbow.
B. Wrap the positioner around the arm.
C. Check for proper alignment of the patient’s arm, while also monitoring the placement of the patient’s IV lines, oximeters, etc., making sure these are all accessible. Adjust positioner if necessary. Follow all safety protocols of the facility.
D. Repeat steps 1-4 for the patient’s other arm.